background image

Содержание 91195989990

Страница 1: ...ualified technician WARNING To reduce the ri_k of tipping the appliance the appliance must be secured by properly iestafied anti tip device packed _Jith the appliance Flat blade screwdriver I 7 15 open end OF 5 t6 hex head screwdriver adjustable wrench Drill with 7 8 bit 4 Hex Head Phillips head screwdriver screwdriver Unlessproperlyinstalled therange could be tipped by steppingor sittingon hot li...

Страница 2: ... the drilled holes and then installthe lag bolts through the bracket Thebolts mustbe properly tightenedas recommended for the hardware Step 3 Checking the Installation Io Completethe installationof the rangeper the installation instructionsprovided withthe product 2 Check if the ANTI TIP bracket is instafledand engaged properly Removethe kick panel or storage drawer and inspect the REAR LEVELINGLE...

Страница 3: ... Volt and 208W120 Volt systems The range connector block is approved for copper wire connection only If you are connecting to aluminum house wiring you must use special UL approved connectors for joining copper to aluminum Removethe wire cover onrange back See Fig 5 Whenreinstalling the wire cover make sure that wires do not become pinched between wire cover and mainback 5 i _ _ CeVER All new cons...

Страница 4: ...shthe hinge locks up againstthe frontframe of the oven cavity to the locked position Locked Position TO REMOVE 1 Open the door allthe wayopen 2 Pushthe hinge locks down towardthe door frame to the unlockedposition Thismayrequire a flat blade screwdriver HingeLock UnlockedPosition SeatedHingeAnn 4 Close the oven door HingeArm 3 Placehands onboth sides of the door 4 Closedoor to the doer removalposi...

Отзывы: