Kenmore 796.4147 Series Скачать руководство пользователя страница 24

Страница: 24 / 33

Door Seal and Glass Cleaning

Due to the location and nature of the door seal, some

detergent and soil residue may build up on the door glass

and seal. Periodic cleaning with a bleach solution can help

remove buildup and stains, and can help sanitize the seal to

prevent odors.

NOTE:

Wear rubber gloves and eye protection while

performing the following procedure:

Dilute ¾ cup (177 ml) liquid chlorine bleach in 1

gallon (3.8 L) of warm/hot water.

Use this solution to wipe down

all surfaces of the gasket and

door glass to remove any

deposits. Be sure to fold back the

lip of the gasket to get under

the inner edge where residue

can build up.

Dry

the gasket and glass with a dry cloth.

To allow the gasket to dry completely, secure the

door slightly ajar with the door magnet. This will

promote air circulation and allow the interior of the

machine to dry. To use this feature, close the door

just until it contacts the door magnet.

NOTE:

• Follow the manufacturer’s instructions for proper use

of bleach.

• To avoid damaging the gasket, NEVER use undiluted

bleach to clean the gasket.

Removing Mineral Buildup

If you live in an area with hard water, mineral scale can form

on internal components of the washer. Use of a water softener

is recommended in areas with hard water.
Use a descaler, such as Washer Magic

, to remove visible

mineral buildup. After descaling, always run the CLEAN

WASHER cycle before washing clothing. Do NOT use steel

wool or abrasive cleaners.

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of

the machine can be cleaned with warm water and a mild,

nonabrasive household detergent.
Immediately wipe off any spills with a soft, damp cloth.

IMPORTANT:

Do not use solvents, cleaning alcohols, or simi-

lar products. Never use steel wool or abrasive cleaners

because they can damage the surface.

Care and Cleaning of the Interior

Use a towel or soft cloth to wipe around the washer door

opening, door seal, and door glass. These areas should be

kept clean to ensure a watertight seal. Be sure to wipe

under the inside rubber seal to remove any moisture or soil.
Always remove items from the washer as soon as the cycle

is complete. Leaving damp items in the washer can cause

wrinkling, color transfer, and odor. Run the CLEAN WASHER

cycle once a month, or more often if needed, to remove

detergent buildup and other residue.

Clean Washer

NOTE:

• Do not add tablet cleaner to the dispenser drawer.

• Do not add any laundry detergent or fabric softener to

the drawer when using CLEAN WASHER.

Turn ON the washer and press and hold the

ACCELA-WASH button for three seconds, and the LED

will blink. Selecting any other cycle after CLEAN

WASHER has been selected will cause the CLEAN

WASHER cycle to be cancelled.
After the cycle ends, open the door and allow the

drum interior to dry completely.

NOTE:

Run the CLEAN WASHER cycle once a month. If a

mildewy or musty smell is present, run the CLEAN

WASHER cycle once a week for three consecutive weeks.

1
2

3
4

CARE AND CLEANING

REGULAR CLEANING

WARNING:

To reduce the risk of fire, electric shock, or injury to persons, read and follow this

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

• Unplug the washer before cleaning to avoid the risk of electric shock.

Failure to follow this warning can

cause serious injury, fire, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

They will damage the finish.

Remove any clothing in the drum.

Open the dispenser drawer.
Add liquid chlorine bleach or another drum cleaner

designed specifically for cleaning front load

washers.

- If using liquid chlorine bleach

Add liquid chlorine bleach to the bleach

compartment of the drawer. (NOTE : Do not

exceed the maximum fill line and do not pour

undiluted liquid bleach directly into the wash

drum.)

- If using powder cleaner

Remove the liquid detergent cup and add powder

cleaner to the main wash compartment of the

dispenser drawer.

- If using tablet cleaner

Add tablet cleaner directly to the wash drum.

Содержание 796.4147 Series


































Результаты поиска

Содержание 796.4147 Series

Отзывы:

Похожие инструкции для 796.4147 Series

Бренды по названию

Популярные бренды

Kenmore 796.4147 Series, Инструкция по использованию и уходу

Результаты поиска

Содержание 796.4147 Series

Отзывы:

Похожие инструкции для 796.4147 Series

Бренды по названию

Популярные бренды