8-2-2 Load / Fan & Open Door Detection Circuit
1. Load Drive Condition Check
To measure outputs of the control board, check voltages between the pins for the following components:
NOTE: When the door of the freezer/refrigerator is left open for 7 minutes or longer, the lamp of the
freezer’refrigerator turns.
2-1. Freezing compartment fan
- 36 -
Pin1 & 2 of con4
MOTOR OFF
2V or less
MOTOR ON
13V~15V
Circuit
Pin Number
Pin Number
Output Voltage
I/Maker Pilot Valve
Con3 Pin3
Con3 Pin2
115 VAC
Lamp-R
Con3 Pin9
Con3 Pin2
115 VAC
Barrier Heater
Con3 Pin8
Con3 Pin2
115 VAC
Lamp-F
Con3 Pin7
Con3 Pin2
115 VAC
Def Heater
Con3 Pin10
Con3 Pin2
115 VAC
Water Pilot Valve
Con3 Pin11
Con3 Pin2
115 VAC
Compressor
Con3 Pin12
Con3 Pin2
115 VAC
Out Plate, Front, R-Door, L-Door Heater
Con2 Pin5
Con3 Pin2
115 VAC