Kenmore 795.7105 series, Инструкция по использованию и уходу

Страница: 122 / 134

114
Programming the watchdog timer
Watchdog timer
The watchdog timer uses a 8-bit counter. The time range is from 32
seconds to 254.5 min with a resolution of 1 min. When timer times
out, a system reset will happen.
Configuration register
The watchdog timer located on the chipset – Win bond
W83977TF. If you want to use it, you have to know how to
read/write the configuration register of W83977TF. The basic
procedure is as follows.
1. Enter configuration mode.
2. Select Logical Device.
3. Select register number.
4. Write/read data to/from register.
5. Exit configuration mode.
To Enter/Exit the configuration mode is to write a specific value to
configuration port — 3F1h.
Enter configuration mode: write value 87h to configuration port
twice.
Exit configuration mode: write value aah to configuration port.