Kenmore 795.69292.902, Руководство по обслуживанию

Страница: 11 / 37

• Place washer between refrigerator door and middle hinge
and re-attach Hinge Pin to Hinge Bracket with 1/4-in.socket
wrench.
NOTE : Bracket has been flipped, but Hinge Pin stays in the
same orientation with its hexagonal end facing upward.
• Place Decorative Screw into outer hole on right side of
housing.
• Attach cover on the right side. Cover is force-fitted
REATTACHING FREEZER DOOR
• Put freezer door down over the Hinge Pin on the Middle
Hinge Pin Bracket
• Place Upper Hinge’s Pin in the top of freezer door and line
up the Upper Hinge with holes in top of refrigerator. Use the 3
bolts to replace Hinge.
• Tighten bolts. Force-fit Top Hinge Cover over Top Hinge.
• Replace cover from left side of refrigerator top onto the
right of top to cover the holes. Cover is also force-fitted
After changing doors, make sure that the corners of the
Door Gaskets are not folded over. To ensure a good seal,
apply a small amount of silicon grease on the corners of
gaskets.
Corners
• Following illustration, flip the Middle Hinge Bracket (Flange
will now be on top) and position on left side of refrigerator
and re-attach with two bolts and a Phillips screw. (Fig. 32).
• Place refrigerator door down over pin on bottom hinge.
(Fig. 32).
Fig. 33
Decorative
Screw
Fig. 35
Fig. 36
Cover (on top of
refrigerator)
Fig. 37
-11 -
Fig. 38