30
Oven Controls
Setting Self Clean
Important: This model comes with lubricated porcelain oven
racks which can remain in the oven during the self clean. Do not
clean this vegetable oil lubrication off the racks. It is important
that the sides of the oven racks always have a light coating of
vegetable oil. To maintain optimal rack performance, reapply a
think layer of vegetable oil to the side of the racks after every
self clean cycle or when the racks become difficult to slide.
To set self clean:
1.
Remove all items from the oven. Be sure oven door is
completely closed.
2.
Press Self Clean and the default 3 hour clean time will
appear in the display. You may accept the default 3 hour
clean time by going to step 3, or choose a different clean
time. Press
Self Clean
and use the numeric keypad or
Up /
Down arrow
keys to select any time between 2 hours and
4 hours. Once you have the desired clean time selected
proceed to Step 3.
3.
Press
START
to activate Self Clean.
4.
A motor driven door lock mechanism will begin locking the
oven door automatically. Do not attempt to open the oven
door (allow 15 seconds for the lock mechanism to lock the
oven). Once the oven door has locked,
CLEAN
will appear
in the display indicating Self Clean has started.
Do not force the oven door open while the self
clean is active. This will damage the automatic door locking
system.
When Self Clean is finished:
Use caution when opening the oven door after
self cleaning. The oven may still be very hot and can cause
burns. To avoid possible burns use care when opening the oven
door after the self clean cycle. Stand to the side of the oven
when opening the oven door to allow hot air or steam to
escape.
1. CLEAN
message will turn off, and
Hot
will appear in
display window.
2.
Once the oven has cooled down (about 1 hour) and
Hot
is
no longer displayed, the oven door may be opened.
3.
When the oven interior has completely cooled, wipe away
any residue or powdered ash with a damp cloth or paper
towel.
Setting Delay Start Self Clean
To start a delay Self Clean with default clean time of 3 hours
and a start time of 9:00 o’clock:
1.
Be sure the clock is set with the correct time of day, the oven
is empty, and all oven racks are removed. Be sure oven
door is completely closed.
2.
Press Delay Start.
3.
Using numeric keypad, enter 9 0 0 or press the
Up arrow
key until
9 0 0
appears in the display.
4.
Press
START
to accept
5.
Press Self Clean.
6.
Press
START
.
If it becomes necessary to stop Self Clean when active:
1.
Press
STOP
.
2.
If Self Clean has heated the oven to a high temperature,
allow enough time for the oven to cool.
3.
Before restarting Self Clean, be sure to read important
notes below.
Important note:
•
If your clock is set with the (default) 12 hr display mode, the
Delay Start for a Self Clean can only be programmed to
start up to 11 hours and 59 minutes after the time showing
in the display (be sure to set the clock to current time
before programming a delay start).
•
To set a Delay Start Self Clean to begin 12 or more hours
(maximum is 23 hours and 59 minutes) after the time of
setting, be sure to first set the control in the 24 Hr display
mode.
•
If Self Clean was active and then interrupted by a power
failure or cancelled before the oven was thoroughly
cleaned, it may be necessary to run another Self Clean
cycle.
•
If the oven temperature was high enough when Self Clean
was interrupted the oven control may not allow another Self
Clean cycle to be set for up to 4 hours.