background image

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

Save these instructions for future reference.

4

I

MPORTANT INSTRUCTIONS FOR UNPACKING 

AND INSTALLATION

IMPORTANT - 

Read and follow the below instruc-

tions and precautions for unpacking, installing, 

and servicing your appliance:
Remove all tape and packaging before using the 

appliance. Destroy the carton and plastic bags 

after unpacking the appliance. Never allow 

children to play with packaging material. Do not 

remove the wiring label and other literature 

attached to the appliance. Do not remove 

model/serial number plate.
Cold temperatures can damage the electronic 

control. When using this appliance for the first 

time, or when the appliance has not been used 

for an extended period of time, be sure the 

appliance has been in temperatures above 32ºF 

(0ºC) for at least 3 hours before turning on the 

power to the appliance.
Never modify or alter the construction of the 

appliance by removing the leveling legs, panels, 

wire covers, anti-tip brackets/screws, or any 

other part of the appliance.
Be sure to have an appropriate foam-type fire 

extinguisher available, visible, and easily acces-

sible located near the appliance.

GROUNDING INSTRUCTIONS

 

- Avoid fire hazard or electrical 

shock. Failure to follow this warning may cause 

serious injury, fire, or death.

 - Avoid fire hazard or electrical 

shock. Do not use an adapter plug, use an 

extension cord, or remove grounding prong from 

the power cord. Failure to follow this warning 

may cause serious injury, fire, or death.

Proper Installation—Be sure your appliance is 

properly installed and grounded by a qualified 

technician.  In the United States, install in accor-

dance with the National Fuel Gas Code ANSI 

Z223.1/NPFA No. 54, latest edition and National 

Electrical Code NFPA No. 70 latest edition, and 

local electrical code requirements. In Canada, 

install in accordance with CAN/CGA B149.1 and 

CAN/CGA B149.2 and CSA Standard C22.1, 

Canadian Electrical code, Part 1-latest editions 

and local electrical code requirements. Install 

only per installation instructions provided in the 

literature package for this appliance.
For personal safety, this appliance must be 

properly grounded. For maximum safety, the 

power cord must be securely connected to an 

electrical outlet or junction box that is the 

correct voltage, is correctly polarized and 

properly grounded, and protected by a circuit 

breaker in accordance with local codes.
It is the personal responsibility of the consumer 

to have the appropriate outlet or junction box 

with the correct, properly grounded wall recep-

tacle installed by a qualified electrician. It is the 

responsibility and obligation of the consumer to 

contact a qualified installer to assure that the 

electrical installation is adequate and is in 

conformance with all local codes and ordi-

nances.
See the installation instructions packaged with 

this appliance for complete installation and 

grounding instructions.

Содержание 790.9261 Series




























Отзывы: