Kenmore 790.4034 Series, Инструкция по использованию и уходу

Страница: 14 / 26

14
Oven Control Features
Temperature display (Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahrenheit (°F) at
the factory. The oven may be programmed for any temperature
from 170°F to 550°F (77°C to 288°C).
To change the temperature to Celsius (°C) or from °C to °F:
1. Press broil. — — appears in the display.
2. Press and hold until HI appears in the display.
3. Press and hold broil until °F or °C appears in the display.
4. Press or to change °F to °C or °C to °F. To
accept the change, wait 6 seconds.
Changing between continuous bake setting or 12-hour
energy saving feature
The oven control has a built-in 12-hour energy saving feature
that will shut off the oven if the oven is left on for more than 12
hours. The oven control can be programmed to override this
feature for continuous baking.
To change the continuous bake setting:
1. Press and hold timer on-off for 6 seconds until a tone
sounds. — — hr will appear in the display for continuous
cooking. The current time of day will return to the display.
2. To cancel the continuous bake setting, press timer on-off
and hold for 6 seconds until a tone sounds. 12 hr will appear
in display indicating that the control has returned to the 12-
hour energy saving feature.
Important note: Changing to continuous bake or 12 hour mode
does not change how the cooktop controls operate.
Operating oven light
(The interior oven light will automatically turn on when
the oven door is opened. Press the oven light icon
located on the upper left control panel to turn the interior oven
light on and off whenever the oven door is closed.
The interior oven light is located at the upper left rear wall of
the oven interior. To change the interior oven light, see
“Changing the oven light” in the Care & cleaning section.
Setting the minute timer
1. Press Timer on-off.
2. Press to increase time in one-minute increments.
Press and hold to increase time in 10-minute incre-
ments. The timer can be set for any amount of time from 1
minute to 11 hours and 59 minutes.
3. When the set time ends, the timer will beep three times and
will continue to beep three times every minute until timer
on-off is pressed.
Important: The minute timer will not start or stop the cooking
process. The minute timer can be used alone or while using any
of the other oven features. If another feature is active when the
minute timer is active, the minute timer will show in the display.
To view information about other active features, press the key
for that feature.
To change the timer while it is in use:
While the timer is active and shows in the display, press and
hold
or to increase or decrease the time
remaining.
To cancel the minute timer before the set time has run out: Press
timer on-off once.