Kenmore 721.9604 series, Инструкция по использованию и уходу

Страница: 41 / 88

TROUBLESHOOTING 41
ENGLISH
Problem Possible Causes / Solutions
Excessive smoking during
a self clean cycle • Excessive soil.
- Press the STOP button. Open the windows to rid the room of smoke. Wait until the self clean
mode is cancelled. Wipe up the excess soil and reset the clean.
Oven door does not
open after a self clean
cycle • Oven is too hot.
- Allow the oven to cool below locking temperature.
The oven does not clean
after a self clean cycle • Oven controls not properly set.
- See the Self Clean section.
• Oven was heavily soiled.
- Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to
self clean again or for a longer period of time.
CLEAN and door flash in
the display • The self clean cycle has been selected, but the door is not closed.
- Close the oven door.
LOCKED is on in the
display when you want
to cook • The oven door is locked because the temperature inside the oven has not dropped below the
locking temperature.
- Press the STOP button. Allow the oven to cool.
Burning or oily odor
emitting from the vent • After checking the oven’s operation, turn the temperature up to 450 °F and leave the oven on
for at least an hour to help remove any oil which might cause smoke and odors when first using
the oven.
Oven racks are difficult
to slide • The shiny, silver-colored racks were cleaned in a self clean cycle.
- Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven
racks with the paper towel.
Oven door will unlock
after selfclean cycle • Oven interior is still hot. Allow about one hour for the oven to cool after the completion of a
self clean cycle. The door can be opened when the LOCK indicator word is not displayed.
• The control and door may be locked.
Moisture collects on oven
window or steam comes
from oven vent. • This is normal when cooking foods high in moisture.
• Excessive moisture was used when cleaning the window.