2
TOOLS YOU WILL NEED:
Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Installation Preparation
PARTS SUPPLIED:
Two #8 Phillips flat head wood screws, 5/8” long to secure dishwasher
to underside of countertop (in literature package).
Two Phillips head, color matched toekick screws (in literature package).
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8”NPT external
thread on one end, opposite end sized to fit water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials for New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection
Hand shut-off valve
Water line 3/8” min. copper
Coupler for extending drain line, if applicable
90° Elbow, Ferrule
and Compression Nut
Wire Nuts (3)
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Hot Water line
Screw Type
Hose Clamps
Coupler
Hand Shut-
Off Valve
2 Wood Screws
Hole Saw Set
Measuring Tape
Tubing Cutter
1/4"
and 5/16"
Nutdriver
Safety Glasses
6" Adjustable
Wrench
Bucket
Flashlight
Gloves
Carpenters
Square
Level
Thread
Seal Tape
Air Gap
Strain Relief
2 Color Matched
Toekick Screws
Drill and Bits
Phillips Head
Screwdriver
Screw Type
Hose Clamp
