Kenmore 664.7511 Series, Инструкция по использованию и уходу

Страница: 9 / 64

9
Do not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact
a trained repair specialist.
4. Replace the burner cap, making sure the alignment pins are
properly aligned with the burner cap.
5. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, turn off the
burner. Do not service the burner yourself. Contact a trained
repair specialist.
Surface Grates
The grates must be properly positioned before cooking. In the
proper position, the grates should be flush and level. Improper
installation of the grates may result in chipping or scratching
of the cooktop.
To ensure proper positioning, align bumpers on grate bottom
with the indentations in the cooktop.
The surface grates interlock using the hook on one end of the
grate and the indent on the other. To remove the grates, lift the
rear of the left grate off the hook, and then lift the front of the
right grate off the hook and pull apart. To replace the grates,
replace the left grate first. Place the front indent of the right
grate over the hook of the left grate, and then lift the rear of
the left grate and place the indent over the hook on the right
grate.
Although the burner grates are durable, they will gradually
lose their shine and/or discolor due to the high temperatures
of the gas flame.
Burner Size
Select a burner that best fits your cookware. See the following
illustration and table.
Burner Size Recommended Use
Small
■
Low-heat cooking
■
Melting chocolate or butter
Medium
■
Multipurpose burner
Large
■
For large cookware
Large (most powerful)
■
For large cookware
■
Most powerful burner
A
B
A. Incorrect
B. Correct
A
A
B
A. Bumpers
B. Alignment indentations
A
B
A. Hook
B. Indent