Kenmore 664.4278 Series, Инструкция по использованию и уходу

Страница: 16 / 92

16
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press SETTINGS/CLOCK until “KEYPRESS TONE”
is displayed.
2.
The current setting will be displayed.
3. Press
1
to adjust the setting.
4. Press START or STOP to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end-of-cycle tones.
1. Press SETTINGS/CLOCK until “REMINDER TONE”
is displayed.
2. The current setting will be displayed.
3. Press
1
to adjust the setting.
4. Press START or STOP to exit and display the time of day.
12/24 Hour Clock
1. Press SETTINGS/CLOCK until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3.
Press
1
to adjust the setting.
4. Press START or STOP to exit and display the time of day.
Demo Mode
IMPORTANT:
This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without the oven turning on. If this feature
is activated, the oven will not work.
1. Press SETTINGS/CLOCK until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3.
Press
1
to adjust the setting.
4. Press START or STOP to exit and display the time of day.
Sabbath Mode
The Sabbath mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath mode is set, only the Bake cycle will
operate. All other cooking and cleaning cycles are disabled.
No tones will sound and the displays will not indicate
temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the heating elements will not turn on
or off immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS/CLOCK until “SABBATH” is displayed.
2. The current setting will be displayed.
3.
Press
1
to adjust the setting.
4. Press START or STOP to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven
12 hours after the oven initiates a cook or clean function.
This will not interfere with any Timed or Delay Cook functions.
1. Press SETTINGS/CLOCK until “12Hr AUTO_OFF”
is displayed.
2. The current setting will be displayed.
3. Press
1
to adjust the setting.
4.
Press START or STOP to exit and display the time of day.
Languages — Scrolling Display Text
Language options are English, Spanish, and French.
1.
Press SETTINGS/CLOCK until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press
1
or
2
to select the desired language.
4. Press START or STOP to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to
provide consistent temperature but may run slightly hot or cool
at any point in time due to this cycling. Most thermometers are
slow to react to temperature change and will not provide an
accurate reading due to this cycling.
The oven provides accurate temperatures; however, it
may cook faster or slower than your previous oven, so the
temperature can be adjusted to personalize it for your cooking
needs. It can be changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SETTINGS/CLOCK until “TEMP CALIB” is displayed.
2. On some models, press
1
to adjust the drawer temperature
calibration. Press START, wait 10 seconds for the display to
change, and then continue with Step 3.
OR
Press START to adjust the oven temperature calibration.
Wait 10 seconds for the display to change, and then
continue with Step 3.
3. Press
3
to increase the temperature in 5°F (3°C) increments,
or press
6
to decrease the temperature in 5°F (3°C)
increments. The offset range is from -30°F to +30°F (-18°C
to +18°C).
4. Press START or STOP to exit and display the time of day.
Example:
After a 5°F (3°C) adjustment increase, the oven will
cook at 305°F (152°C) while the display shows 300°F (149°C).