18
Drying Rack
Installing the drying rack
1.
Open the Dryer door.
2.
Position drying rack in tumbler, placing the front lip of the
drying rack on the top of the lint filter.
3.
Place the rear legs in the two recessed areas of the dryer’s
back wall then push down the middle of the drying rack to
fix.
4.
Place the items to be dried on the rack, leaving space
between them so air can circulate.
5.
Close the Dryer door.
6.
Use the Time Dry cycle. Select the time according to the
moisture and weight of the items. Start the Dryer. It may be
necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
SUGGESTED TEMP.
SETTINGS
Washable sweaters
(block to shape and lay flat on
rack)
Extra Low (timed dry cycle)
Stuffed toys
(cotton or polyester fiberfilled)
Extra Low (timed dry cycle)
Stuffed toys
(foam or rubber-filled)
Air Fluff
Foam rubber pillows
Air Fluff
Sneakers
Air Fluff
WARNING:
Drying foam rubber, plastic, or rubber on a heat
setting may cause damage to the item and lead to a fire hazard.
NOTE:
You must remove dryer rack for normal tumbling. To
remove the dryer rack, lift it straight up and out of the dryer.
Power button
Press once to turn your Dryer on, press again to turn it off.
If your dryer is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
Child Lock
A function to prevent children from playing with your dryer.
Setting/Releasing
If you want to set or release the Child Lock, press both the Time
and Cycle Signal simultaneously for 3 seconds.
How to Set:
1.
It can be set while your dryer is running.
2.
Once you set the Child Lock function, no button, except for
the Power button, will respond until you release the Child
Lock function.
3.
The Child Lock indicator will be lit.
NOTES:
1.
If the dryer is powered on again, the Child Lock function
stays on.
2.
To release that function, follow the instructions above.
NOTE:
When other buttons, except for the Power button, do not
respond, check the Child Lock indicator.
Drum Light
Lights the dryer drum while the dryer is running.
Setting/Releasing
If you want to set or release the Drum Light, press both the
Dryness Level and Temp. buttons simultaneously.
It can be set while your dryer is not only running but also when it
is stopped.
If you do not turn the Drum Light off within 5 minutes of turning it
on, it is automatically turned off.
>%(67@$B(1BYLQGG
Содержание 592-89032
Страница 25: ...Notes 67 B 1BY LQGG ...
