6
Dishwasher Features
GETTING STARTED
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Completely close the door so that it is latched shut.
5. Select desired CYCLE (See Cycle Chart). The indicator light above the pad will
glow when selected.
6. Select desired OPTIONS (See Energy Options). The indicator light above the pad
will glow when selected.
7. Run hot water faucet nearest dishwasher until water is hot. Turn water off .
8. To start, press START/CANCEL pad.
Your dishwasher cleans by spraying a mixture of hot water and detergent through the
spray arms against soiled surfaces. Each cycle begins by fi lling with water covering the
fi lter area. Water is then pumped through the fi lter and spray arms. Soil particles go
down the drain as the water is pumped out and replaced with clean water. The number
of water fi lls will vary with the cycle being used.
Detergent
Dispenser
Middle Spray Arm
Lower Spray
Arm
Tub Gasket
Upper Rack
Upper Spray Arm
Cup Shelf
Vent
Serial Label
(located on
right side of
tub)
Bottom Rack
Silverware
Basket
Filter
Heating
Element
Glass Trap
Rinse Aid
Dispenser
