Kenmore 501-66722 Скачать руководство пользователя страница 5

This guide contains many important safety messages. Always 

read and obey

all safety messages.

This is the safety alert symbol. It alerts you to safety messages that inform you
of hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING, or CAUTION. These words mean:

WARNING

CAUTION

You 

can

be killed or seriously injured if you don’t follow instructions.

Indicates an imminently hazardous situation which, if not avoided, 

may 

result in minor or moderate injury, or product damage only.

All safety messages will identify the hazard, tell you how to reduce the chance of injury and tell you what can happen if
the instructions are not followed.

SAFETY MESSAGES

WARNING

To reduce the risk of fire, electric shock, or injury 
to persons when using your product, basic safety
precautions should be followed, including the following:

Read all instructions before using this appliance:

NEVER unplug your refrigerator by pulling on the power cord.
Always grip the plug firmly and pull it straight out from the
outlet.
Repair or replace immediately all electric service cords that
have become frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its length or at
either the plug or connector end.
When moving your refrigerator away from the wall, 
be careful not to roll over or damage the power cord.
DO NOT store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
DO NOT allow children to climb, stand, or hang on the
refrigerator doors or shelves in the refrigerator. They could
damage the refrigerator and seriously injure themselves.
Keep fingers out of “pinch point” areas; clearances between 

Unplug your refrigerator before cleaning or making any repairs. 

NOTE:

We strongly recommend that any servicing be

performed by a qualified individual.

Before replacing a burned-out light bulb, 

unplug

the

refrigerator or turn off power at the circuit breaker or fuse box
in order to avoid contact with a live wire filament. (A burned-
out light bulb may break when being replaced.) 

NOTE:

Setting

either or both controls to the OFF position does not remove 
power to the light circuit.

After your refrigerator is in operation, do not touch the cold
surfaces in the freezer compartment when hands are damp or
wet. Skin may adhere to the extremely cold surfaces.
In refrigerators with automatic icemakers, avoid contact with
the moving parts of the ejector mechanism, or with the heating
element that releases the cubes. DO NOT place fingers or
hands on the automatic icemaking mechanism while the
refrigerator is plugged in.
DO NOT refreeze frozen foods which have thawed completely.
The United States Department of Agriculture in Home and
Garden Bulletin No. 69 says:

“...You may safely refreeze frozen foods that have thawed if

they still contain ice crystals or if they are still cold below
40°F (4°C).”
“...Thawed ground meats, poultry, or fish that have any off-odor
or off-color should not be refrozen and should not be eaten.
Thawed ice cream should be discarded. If the odor or color of
any food is poor or questionable, get rid of it. The food may be
dangerous to eat.”
“Even partial thawing and refreezing reduces the eating quality
of foods, particularly fruits, vegetables and prepared foods.
The eating quality of red meats is affected less than that of
many other foods. Use refrozen foods as soon as possible to
save as much of their quality as you can.”

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

5

the doors and cabinet are necessarily small. Be careful
when you open the doors when children are in the area.

For personal safety, this appliance must be properly grounded.
Have the wall outlet and the circuit checked by a qualified
electrician to make sure the outlet is properly grounded.

The refrigerator-freezer should be so positioned that the supply

plug is accessible for quick disconnection when accident happens.

Do not store bottles in the freezer compartment - they may
break when frozen, causing damage.

This refrigerator must be properly installed in accordance
with the 

Attention Installer Instructions

that were taped

to the front of the refrigerator.

DANGER

You 

will

be killed or seriously injured if you don’t follow instructions.

Содержание 501-66722

































Отзывы: