manualshive.com logo in svg

Kenmore 501-6661, Инструкция по использованию и уходу

Поделиться
Скачать
Kenmore 501-6661 Скачать руководство пользователя страница 15

REFRIGERATOR INSTALLATION

REFRIGERATOR INSTALLATION

4. Removing Freezer Handle

Remove the cap (1) and the 2 caps (2) using a slotted
screwdriver.

Loosen the 2 screws (3), take of f the handle (4), and
install it on the right.

Attach the caps you removed earlier [figures (1) and
(2)].

5. Installing Freezer Door

Install the base grille (1).

Install the door (3) onto the bottom hinge pin.

Install the middle hinge (4) on the opposite side with the
screw (5) and the screws (9).

6. Installing Refrigerator Door

Place the washer (6) on the middle hinge pin (7).

Install the door (8) so that it fits onto the middle hinge
pin (7).

Install the top hinge (10) with screws.

Reinstall top hinge cover (11).

7. After Completing the Job

Make sure that each at the four corners of the door
gasket is not folded over on itself. To ensure a good
seal, apply a small amount of silicon grease on the
gasket.

15

NOTE:

 Before start, check handle type in your model. 

Handle Type 1

Handle Type 2
For this handle type is not necessary to remove it. 

Содержание 501-6661


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды