ENGLISH
6
INTERIOR LIGHT
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and
unplug the electrical cord.
Replace the old bulb
with a bulb of the same wattage.
REFRIGERATOR FEATURES
Full Width Cantilever Glass Shelf
To adjust cantilever shelves:
NOTE:
Cantilever shelves are supported at the back of
the refrigerator.
1
Lift front edge up.
2
Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf
into the wall bracket. Lower the shelf into the desired slots
and lock into position.
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can
be quickly selected.
Some models have door racks or bins that can accommodate
gallon-sized plastic drink containers and economy-sized jars
and containers.
The dairy compartment, which is warmer than the general
food storage section, is intended for short term storage of
cheese, spreads, or butter.
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the refrigerator to
cool down completely. The refrigerator will run continuously
for the first several hours.
TEMPERATURE CONTROL
The temperature control is located inside the refrigerator
compartment. The temperature is
factory preset to provide satisfac-
tory food storage temperatures.
However, the temperature control is
adjustable to provide a range of
temperatures for your personal
satisfaction. If a colder temperature
is desired, turn the temperature
control knob toward COLDEST and
allow several hours for temperatures
to stabilize between adjustments.
SETTING THE TEMPERATURE CONTROL
Cold Control
DOOR REMOVAL
If door must be removed :
1. Gently lay refrigerator on its back, on a rug or blanket.
2. Remove two base screws and base panel.
3. Remove bottom hinge screws.
4. Remove plastic top hinge cover.
5. Remove screws from top hinge.
6. Remove top hinge from cabinet.
7. Remove door and bottom hinge from cabinet.
8. To replace door, reverse the above order and securely
tighten all screws to prevent hinge slippage.
