P/N 134186000A (0210)
Prewash Cycle (cont)
•
The Prewash water temperature is the same as
the wash water temperature selected. To avoid
setting protein stains, select cold water.
•
This cycle should always be followed by a
complete wash cycle using the recommended
amount of detergent.
Power Wash Cycle
Up to 18 minutes of reversing tumble action for most
fabrics. A spray rinse, three rinses, three spins, a
pause and a brief tumble complete the cycle. Select
SLOW, NORMAL
or
FAST
Final Spin as desired.
•
Heavy
Wash
provides up to 18 minutes of
reversing tumble action for heavily soiled fabrics.
•
Short
Wash provides up to 6 minutes of reversing
tumble action for lightly soiled fabrics.
Load the washer, fill the dispenser, and select the
proper settings. Turn the cycle selector to the desired
setting and pull out the knob.
Eco Cycle
Choose Eco Cycle and the settings to conserve
additional time, water, and energy. Eco Cycle
provides up to 13 minutes of reversing tumble action
for regular and perm press items. Three rinses, three
spins, a pause and a brief tumble complete the cycle.
Select FAST Final Spin.
Use the Delay Start feature to select a wash time
during off-peak energy hours. The start of the Eco
Cycle can be delayed for 2 to 6 hours.
Load the washer, fill the dispenser, and select the
proper settings. Turn the cycle selector to the desired
time delay setting and pull out the knob. The timer
will automatically advance to the Eco Cycle setting.
EXTRA RINSE
- Use Extra Rinse when additional
rinsing is desired to remove excess dirt and detergent
from heavily soiled loads.
• Select
Extra Rinse YES
to automatically include
an extra rinse in Power Wash or Delicates/Hand
Washables cycle.
•
Select
Extra Rinse NO
to conserve water when
an extra rinse is not desired.
FINAL SPIN
- There are three final spin speed
options available for each cycle. Note: The speeds
will vary from cycle to cycle. For example,
Regular
FAST
spin speed is much faster than
Delicates/Hand
Washables FAST
spin speed.
•
SLOW
is recommended for hand washables and
items which may wrinke easily.
•
NORMAL
is recommended for most loads.
•
FAST
provides a faster spin speed to increase
water extraction and decrease drying time.
Delicates and Hand Washables Cycle
Up to 11 minutes of gentle tumble action for the
gentle care of knit, delicate and hand washable items.
A spray rinse,two rinses,two spins, a pause and a brief
tumble complete the cycle. Select
SLOW, NORMAL
or
FAST
Final Spin as desired.
Controls
Always follow instructions on fabric care labels.
Note:
There is no need to select a water level
because the washer automatically adjusts the
water level to the type and size of wash load.
WASH/RINSE TEMPERATURE
- This determines water
temperatures for washing and rinsing. For example,
the Warm/Cold setting provides a warm water wash
and a cold water final rinse.
Note:
Detergents are not as effective at wash water
temperatures below 65°F (18.3°C).
The following chart suggests wash/rinse temperatures
for basic fabric types.
CYCLE SIGNAL
- A signal will sound at the end of the
cycle when the Cycle Signal is set to
ON
.
Wash/Rinse
Fabric Type
Temperature
Heavily soiled white/colorfast
Hot/Cold
cotton, perm press
Normally soiled white/colorfast Warm/Cold *
cotton, perm press
Lightly soiled/noncolorfast
Cold/Cold *
fabrics, knits, delicates,
hand washables
Washable woolens
Warm/Warm*
* unregulated or Automatic Wash Temperature
Auto Temp Control
The normal temperature of warm and cold wash water
can be affected by the hot water heater setting and
seasonally low ground water temperatures in some
geographic areas. Since detergents work best in wash
water at a minimum of 65° F, select an
Auto Temp
Control
to regulate the temperature of the warm and
cold wash water in any cycle.
Wash water in the
Auto Temp Warm/Cold
and
Auto
Temp Warm/Warm
settings is regulated to
approximately 100° F. and the wash water in the
Auto
Temp Cold/Cold
setting is regulated to approximately
70° F. Rinse water temperatures are not regulated.
INDICATOR LIGHTS
will turn on during the
appropriate portions of each cycle:
WASH, RINSE
,
and
FINAL SPIN
. When the door is closed, the
Door Lock Indicator
lights up when the cycle
selector knob is pulled out, and turns off at the
end of the cycle.