Kenmore 417.4112 Series, Инструкция по использованию и уходу, Страница: 7 / 26

7
Operating Instructions
Cycle Settings
Appropriate wash temperature, spin speeds, soil level and
options will automatically be displayed for each cycle.
The settings can be changed before the cycle is started.
To protect your fabrics, not all settings and options are
available with every cycle. The indicator will not light if the
setting is not available with that cycle.
Modi
fi cations for each cycle will be remembered and
recalled each time that cycle is selected in the future. If
changes are attempted after the cycle starts, the lights will
blink, the signal will beep and “
Err
” will be displayed.
Follow the fabric care label instructions
on items to be washed.
For best results
NOTE
To change settings once the cycle starts, press PAUSE ,
adjust the setting and press START to resume the cycle.
WASH WATER TEMPERATURE
To change the preset temperature, press the Wash Temp but-
ton to scroll to the desired setting. Select a wash water tem-
perature according to fi ber content, colorfastness and soil
level. A cold water rinse saves energy and reduces wrinkling.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Wash Temp water temperatures are automatically regu-
lated to maximize detergent e ff ectiveness and improve
washing performance. The water heater setting and its
distance from the washer, water usage in other parts of
the home, and seasonally low ground water temperature in
some geographic areas can a ff ect water temperature.
SPIN SPEED
SOIL LEVEL
To protect your fabrics, not all spin speeds are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Extra High , High , Medium and Low spin speeds are
available for appropriate cycles. The spin speed and/or
duration of fi nal spin vary from model to model and cycle
to cycle.
Increasing the spin speed will extract more water, decrease
drying time and conserve energy. Decreasing the spin
speed will reduce wrinkling.
Select
Low spin speed to gently spin items that should be
line dried.
Use
No Spin to omit the fi nal spin at the end of the cycle.
The load will be very wet. Remove items from the wash
drum to drip dry or select a Rinse & Spin cycle to remove
excess water at a more convenient time.
Adjust the wash time based on the soil level of each load.
Heavy , Normal , and Light soil levels are available.
5
To return to factory set-
tings, press these two
buttons at the same time
and hold until the signal
sounds.
Hot
Use this setting for heavily soiled colorfast fabrics such
as towels, bedding, and children’s clothing.
Warm
Use this setting for normally soiled white or colorfast cot-
tons and blends.
Cool
Use this setting for normally soiled sheets, casual items
and washable woolens.
Cold
Some warm water will automatically blend with cold
tap supply to achieve a precise Wash Temp Cold. Use
this setting for lightly soiled non-colorfast items, knits,
delicates, and hand washables.
Tap Cold
Wash and rinse temperatures are equivalent to tem-
perature of cold tap supply. Use this selection for lightly
soiled non-colorfast items, knits, delicates, and hand
washables and other fabrics and colors that are prone to
dye transfer. For use with cold water detergents.