background image

USE AND CARE

4 • 464261709

OPD Hand Wheel

LP (Liquefied Petroleum Gas)

LP gas is nontoxic, odorless and colorless when produced.

 For 

Your Safety

, LP gas has been given an odor (similar to rotten 

cabbage) so that it can be smelled. 

LP gas is highly flammable and may ignite unexpectedly when 
mixed with air.

LP Tank Filling

Use only licensed and experienced dealers.

LP dealer 

must purge new tank

 before filling.

Dealer should 

NEVER

 fill LP Tank more than 80% of LP Tank 

volume. Volume of propane in tank will vary by temperature.

A frosty regulator indicates gas overfill. Immediately close LP 
Tank valve and call local LP gas dealer for assistance.

• Do not release liquid propane (LP) gas into the atmosphere. 

This is a hazardous practice.

• To remove gas from LP Tank, contact an LP dealer or call a 

local fire department for assistance. Check the telephone 
directory under “Gas Companies” for nearest certified LP 
dealers.

LP Tank   
• The LP Tank used with your grill must meet the following 

requirements:

Use LP Tanks only with these required measurements: 12" 
(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) 
capacity maximum.

• LP Tanks must be constructed and marked in accordance with 

specifications for LP Tanks of the U.S. Department of 
Transportation (DOT) or for Canada, CAN/CSA-B339, tanks, 
spheres and tubes for transportation of dangerous goods. 
Transport Canada (TC). See LP Tank collar for marking.

LP Tank valve must have:
• Type 1 outlet compatible with 

regulator or grill.

• Safety relief valve.
• UL listed Overfill Protection 

Device (OPD). This OPD safety
feature is identified by a unique triangular hand wheel. 

Use 

only LP Tanks equipped with this type of valve.

• LP Tank must be arranged for vapor withdrawal and include 

collar to protect LP Tank valve. Always keep LP Tanks in 
upright position during use, transit or storage.

LP Tank in upright position for vapor withdrawal

 

LP Tank Removal, Transport And Storage

• Turn OFF all control knobs and LP tank valve. Turn coupling 

nut counterclockwise by hand only - do not use tools to 
disconnect. Lift LP tank wire upward off of LP tank collar, then 
lift LP tank up and off of support bracket. Install safety cap onto 
LP tank valve. Always use cap and strap supplied with valve. 

Failure to use safety cap as directed may result in serious 

personal injury and/or property damage. 

LP Tank Valve

Retainer Strap

Safety Cap

• A disconnected LP tank in storage or being transported must 

have a safety cap installed (as shown). Do not store an LP tank 
in enclosed spaces such as a carport, garage, porch, covered 
patio or other building. Never leave an LP tank inside a vehicle 
which may become overheated by the sun.

• Do not store an LP tank in an area where children play.

• NEVER store a spare LP cylinder under or near the 

appliance or in an enclosed area. 

• Never fill a cylinder beyond 80% full.
• If the information in two points above is not 

followed exactly, a fire causing death or serious 

injury may occur. 

• An over filled or improperly stored cylinder is a 

hazard due to possible gas release from the safety 

relief valve.  This could cause an intense fire with 

risk of property damage, serious injury or death.

• If you see, smell or hear gas escaping, immediately 

get away from the LP cylinder/appliance and call 

your fire department.

DANGER

Содержание 415.16657900





























Отзывы: