manualshive.com logo in svg
background image

2

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR 
INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.  Use this unit only in the manner intended by the manufacturer. If 

you have questions, contact the manufacturer at the address 

listed in the warranty.

2.  Before servicing or cleaning unit, switch power off at service 

panel and lock the service disconnecting means to prevent 

power from being switched on accidentally. When the service 

disconnecting means cannot be locked, securely fasten a 

prominent warning device, such as a tag, to the service panel.

3.  Installation work and electrical wiring must be done by  

quali

fi

 ed personnel in accordance with all applicable codes 

and standards, including 

fi

 re-rated codes and standards.

4. Suf

fi

 cient air is needed for proper combustion and exhausting 

of gases through the 

fl

 ue (chimney) of fuel burning equipment 

to prevent backdrafting. Follow the heating equipment 

manufacturer’s guideline and safety standards such as those 

published by the National Fire Protection Association (NFPA), and 

the American Society for Heating, Refrigeration and Air Conditioning 

Engineers (ASHRAE), and the local code authorities.

5.  When cutting or drilling into wall or ceiling, do not damage 

electrical wiring and other hidden utilities.

6.  Do not use this range hood with any additional solid state speed 

control device.

7.  Ducted fans must always be vented to the outdoors.

8.  To reduce the risk of 

fi

 re, use only metal ductwork.

9.  When performing installation, servicing or cleaning the unit, it 

is recommended to wear safety glasses and gloves.

10. This unit must be grounded. To provide protection against 

electric shock, connect to properly grounded outlets only.

11. Inspect ducting at least every 12 months or after every range 

top 

fi

 re in order to detect any risky conditions.

12. When applicable local regulations comprise more restrictive 

installation and/or certi

fi

 cation requirements, the aformentioned 

requirements prevail on those of this document and the installer 

agrees to conform to these at his own expenses.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1.  Never leave surface units unattended at high settings. Boilovers 

cause smoking and greasy spillovers that may ignite. Heat oils 

slowly on low or medium settings.

2.  Always turn hood ON when cooking at high heat or when 

flambeing food (i.e.: Crêpes Suzette, Cherries Jubilee, 

Peppercorn Beef Flambé).

3.  Clean ventilating fan frequently. Grease should not be allowed 

to accumulate on fan or 

fi

 lters.

4.  Use proper pan size. Always use cookware appropriate for the 

size of the surface element.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE 
EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE 
FOLLOWING:

1.  SMOTHER FLAMES with a close-

fi

 tting lid, cookie sheet, 

or metal tray, then turn off the burner. BE CAREFUL TO 

PREVENT BURNS. If the 

fl

 ames do not go out immediately, 

EVACUATE AND CALL THE FIRE DEPARTMENT.

2.  NEVER PICK UP A FLAMING PAN - You may be burned.

3.  DO NOT USE WATER, including wet dishcloths or towels - This 

could cause a violent steam explosion.

4.  Use an extinguisher ONLY if:

A.  You know you have a Class ABC extinguisher and you 

already know how to operate it.

B. The 

fi

 re is small and contained in the area where it started.

C. The 

fi

 re department is being called.

D. You can 

fi

 ght the 

fi

 re with your back to an exit.

*Based on “Kitchen Fire Safety Tips” published by NFPA.

CAUTION

1.  For indoor use only.

2.  For general ventilating use only. Do not use to exhaust 

hazardous or explosive materials and vapors.

3.  To avoid motor bearing damage and noisy and/or unbalanced 

impellers, keep drywall spray, construction dust, etc. off power unit.

4.  Your hood motor has a thermal overload which will automatically 

shut off the motor if it becomes overheated. The motor will 

restart when it cools down. If the motor continues to shut off 

and restart, have the hood serviced.

5.  For best capture of cooking impurities, the bottom of the hood 

should be a minimum of 24” and a maximum of 30” above the 

cooking surface.

6.  Two installers are recommended because of the large size and 

weight of this hood.

7.  To reduce the risk of 

fi

 re and to properly exhaust air on a ducted 

installation, be sure to duct air outside. Do not exhaust air into spaces 

within walls or ceiling or into attics, crawl spaces, or garage.

8.  This product is equipped with a thermostat which may start 

blower automatically. To reduce the risk of injury and to prevent 

power from being switch on accidentally, switch power off at 

service panel and lock or tag service panel.

9.  Because of the high exhausting capacity of this hood, you 

should make sure enough air is entering the house to replace 

exhausted air. Open a window close to or in the kitchen.

10. To reduce the risk of 

fi

 re and electric shock, the Kenmore Elite

 

hood should only be installed with its own built-in blower.

11. Please read speci

fi

 cation label on product for further information 

and requirements.

READ AND SAVE THESE INSTRUCTIONS

SAFETY INSTRUCTIONS

TABLE OF CONTENTS

WARRANTY

SECTION .................................................................. PAGE(S)

Warranty ................................................................................2
Safety Instructions .................................................................2
Operation ...............................................................................3
Cleaning ................................................................................3
Parts Included With Hood ......................................................4
Parts Not Included With Hood ...............................................4
Tools Needed ........................................................................4
Range Hood System .............................................................5
Equivalent Duct Length Chart................................................6
Select Installation Type .........................................................7
Wiring Installation ..................................................................8
Prepare the Hood  ............................................................9-10
Install the Hood...............................................................11-12
Finalize the Installation ...................................................12-13
Installing Grease Filters .......................................................13
Changing Light Bulbs ..........................................................13
Service Parts .......................................................................14

Full One Year Warranty Including Parts and Labour

For one year from the date of purchase, when the range hood is installed and operated 

in Canada, in accordance with the instruction in the Owners Manual and Installation 

Instructions, Sears Canada Inc. (‘‘Sears’’) will repair, or replace at its option, mechanical 

or electrical parts, if defective in material and workmanship, and perform any necessary 

adjustments at no charge.

NORMAL RESPONSIBILITY OF THE CONSUMERS

The following are not covered by this warranty:
1. Parts and service resulting from damage caused by accident, negligence or commercial 

usage.

2. Parts and service required as a result of defective or inadequate fusing or house wiring.
3. Parts and service required as a result of 

fi

 re, 

fl

 ood or Acts of God.

SEARS CANADA INC. TORONTO, ONTARIO  M5B 2B8   1-800-4MY-HOME

SEARS MAINTENANCE AGREEMENT

Sears Maintenance Agreement... your way to buy tomorrow’s services at today’s prices... 

and Sears Service is nationwide.
Maintain the value of your Kenmore range hood with a Sears Maintenance Agreement. 

Sears range hoods as designed, manufactures and tested for years of dependable 

operation. Yet, any modern appliance may require service from time to time.

Sears maintenance Agreement

Eliminates large or small repair bills resulting from normal use.
Allows for as many service calls as required.
Provides for service by professionnal Sears-Trained Technicians.
This Maintenance Agreement does not cover original installation, reinstallation or damage 

resulting from external causes such as acts of abuse, theft, 

fi

 re, 

fl

 ood, wind, lightning, 

freezing, power failure, power reduction, etc.

SEARS CANADA INC.

222 Jarvis Street,  Toronto, Ontario, Canada  M5B 2B8

1-800-4MY-HOME

INTENDED FOR DOMESTIC COOKING ONLY

!

!

!

Содержание 31130















Отзывы: