13
W
arr
anty
Saf
ety
Cle
aning
Oper
ation
Installation
Ser
vice P
ar
ts
This hood requires 2 x 50 W max, 120 V, with GU10 base, shielded halogen lamps (not included).
INSTALL LIGHT BULBS
WARNING: Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk
of personal injury, only install shielded halogen lamps. Also, never install a cool beam, a dichroïc lamp, a
lamp not suitable for use in recessed luminaires or identi
fi
ed for use in enclosed
fi
xtures.
!
1. Install bulbs by placing the bulb leads into their grooves
in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove bulbs, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
1
2
HO0090
REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Reinstall grease drip rail (
1
). The illustration at right shows how
to reinsert the grease drip rail into the range hood.
CAUTION: Remove protective plastic
fi
lm covering
fi
lters before installing them.
!
NOTE: Assemble the metal handles to the
fi
lters, using provided no. 8-32 x 1/4" screws, before installing them
in the hood.
It is recommended to install side
fi
lters
fi
rst and
fi
nish with center one.
1
.
Insert one end of the
fi
lter into the
upper channel of the hood.
2. Raise the other end toward the inside
of the hood and insert in the grease
drip rail of the hood.
1
HD0245
2
HD0244
1
