Kenmore 22003, Инструкция по установке

Страница: 8 / 16

EN-6
Install Trim Kit Frame
Replace Any Loose Items
Flat-head screws
Flat-head screws
1. Your trim kit is now fully installed. Replace any loose items
that were removed from the inside of the microwave oven.
Save or discard the extra screws.
Do not place them in the microwave oven.
2. Keep these installation instructions for future reference.
3. Reconnect power at fuse box or circuit breaker panel to the
receptacle into which the microwave oven is plugged.
1. Place the trim kit frame over the front surface of the
microwave oven.
2. Open the microwave oven door. Secure the trim kit frame
to the top and bottom brackets using four flat-head screws
(two on the inside top and two on the inside bottom).
Install The Top Bracket
Screws
1. Place the top bracket on the top of the microwave oven,
with the tabs on the top and sides of the bracket fitting
squarely against the microwave oven.
2. Drill pilot holes through the holes in the top bracket.
Attach the top bracket to the cabinet using nine round-
head screws