background image

 

 

LP Cylinder   

USE AND CARE   

• 

The LP cylinder used with your grill must meet the following 
requirements: 

• Use LP cylinders only with these required measurements: 12" 

(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) 

  Capacity maximum. 
• LP cylinders must be constructed and marked in accordance 

with specifications for LP cylinders of the U.S. Department of 
Transportation (DOT) or for Canada, CAN/CSA-B339, 
cylinders, spheres and tubes for transportation of dangerous 
goods. Transport Canada (TC). See LP cylinder collar for 
marking.   

• LP cylinder valve must have:   

• Type 1 outlet compatible with   

regulator or grill. 

• Safety relief valve. 
• UL listed Overfill Protection 

Device (OPD). This OPD safety   
feature is identified by a unique triangular hand wheel. Use 
only LP cylinders equipped with this type of valve. 

• LP cylinder must be arranged for vapor withdrawal and 

include collar to protect LP cylinder valve. Always keep LP 
cylinders in upright position during use, transit or storage. 

 

 

 

 

 

   

OPD Hand Wheel 

 

• 

NEVER store a spare LP cylinder under or near the 

appliance or in an enclosed area. 

 

LP cylinder in upright position for vapor withdrawal   

LP (Liquefied Petroleum Gas)   

LP Tank Removal, Transport And Storage 

 

• 

Turn OFF all control knobs and LP tank valve. Turn coupling nut 

counterclockwise by hand only - do not use tools to   

disconnect. Lift LP tank wire upward off of LP tank collar, then lift 
LP tank up and off of support bracket. Install safety cap onto LP 
tank valve. Always use cap and strap supplied with valve. 
Failure  to  use  safety  cap  as  directed  may  result  in  serious 
personal injury and/or property damage. 

 

LP Tank Valve   

• LP gas is nontoxic, odorless and colorless when produced. For 

Your Safety, LP gas has been given an odor (similar to rotten 
cabbage) so that it can be smelled.   

• LP gas is highly flammable and may ignite unexpectedly when 

mixed with air. 

 

LP Cylinder Filling 

• Use only licensed and experienced dealers.   
• LP dealer must purge new cylinder before filling.   
• Dealer should NEVER fill LP cylinder more than 80% of LP 

cylinder volume. Volume of propane in cylinder will vary by 
temperature.   

• A frosty regulator indicates gas overfill. Immediately close LP 

cylinder valve and call local LP gas dealer for assistance.   

• Do not release liquid propane (LP) gas into the atmosphere. This 

is a hazardous practice.   

• To remove gas from LP cylinder, contact an LP dealer or call a 

local fire department for assistance. Check the telephone 
directory under “Gas Companies” for nearest certified LP 
dealers.   

 
 

Safety Cap   

 

                                                 

Retainer Strap   

 A disconnected LP tank in storage or being transported must 

have a safety cap installed (as shown). Do not store an LP tank 
in enclosed spaces such as a carport, garage, porch, covered 
patio or other building. Never leave an LP tank inside a vehicle 
which may become overheated by the sun. 

• Do not store an LP tank in an area where children play.   

DANGER 

5   

• 

Never fill a cylinder beyond 80% full.   

• If the information in the two points above is not 

followed exactly, a fire causing death or serious 
injury may occur.   

• An overfilled or improperly stored cylinder is a   

hazard due to possible gas release from the safety 
relief valve. This could cause an intense fire with risk 
of property damage, serious injury or death.   

• If you see, smell or hear gas escaping, immediately 

get away from the LP cylinder and appliance and 
call your fire department.   

 

Содержание 146.10377910


































Отзывы: