Kenmore 110.20362810, Инструкция по использованию и уходу

Страница: 10 / 40

10
7.
Select wash temp
Select the wash temperature by turning the Wash Temp knob
to the desired temperature. All rinses are tap cold.
NOTE:
Always read and follow fabric care label instructions
to avoid damage to your items.
Wash Temp Suggested Fabrics
Hot
Some cold water is added
to save energy. This may be
cooler than your hot water
heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water may be
added, so this may be cooler
than what your previous washer
provided.
Bright colors
Moderate to light soils
Cool Lights
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Colors that bleed or fade
Light soils
Cool Darks
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Dark colors that bleed or fade
Light soils
Cold
Warm water may be added
to assist in soil removal and
to help dissolve detergents.
Dark colors that bleed or fade
Light soils
8.
Select fabric softener option
The fabric softener knob must be set to “Yes” when using the
fabric softener dispenser. This ensures that fabric softener is
added at the correct time in the rinse for even distribution.
9.
Select water level
Press START/PAUSE/UNLOCK LID/CANCEL to start the wash
cycle. When the cycle has fi nished, the Complete cycle status
light will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and avoid rusting
of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add one or two missed garments after the
wash has started, simply open the lid and this will pause the
cycle. After adding the garments, simply close the lid and the
cycle will resume. The washer may add some additional water
to off set the added garments.
If, instead, you press Start/Pause/Unlock Lid/Cancel to pause
the cycle and then open the lid to add garments, you will need
to press Start/Pause/Unlock Lid/Cancel after closing the lid
to resume the cycle.
NOTE: Washer will not fi ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
UNLOCK LID/CANCEL and leave the lid closed. Once your
desired soak time has elapsed, press START/PAUSE/UNLOCK
LID/CANCEL again to continue the cycle. As long as the lid
remains closed, your soak time can be longer than 10 minutes.
However, if the lid is opened during the soak and remains
open for more than 10 minutes, the water will pump out
automatically.
Set the Water Level knob to the Auto setting and the washer
will automatically sense the appropriate water level for the
load size and type.
Set the Water Level knob to the Deep Fill setting and the washer
will automatically add more water to any cycle at any time
during the wash cycle.
NOTE: The cycle will be longer due to extended fi ll times
when using the Deep Fill setting.
10.
Press START/PAUSE/UNLOCK LID/
CANCEL to begin wash cycle