Kendall Howard ESDC-7836-1000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 9

Kendall Howard ESDC-7836-1000 Скачать руководство пользователя страница 7

Page | 7

Save This Manual for Future Reference

Care and Cleaning

Painted Surfaces

All painted surfaces can be cleaned with a non-abrasive, non-ammonia or non-bleached based

cleaner. Do not use soap or detergents on exposed metal surfaces of the sliding drawer, fixed

shelf, or pegboard. The soap may leave a residue that will insulate the mat from ESD

grounding. Wipe down all cleaned surfaces with a lint free soft cloth.

ESD Mats

Clean only with approved cleaners. Wipe down all cleaned surfaces with a lint free soft cloth.

Leg Levelers

The front leg levelers are adjustable and non-conductive. The rear leg levelers are adjustable

and have pre-installed ground boots. They can be cleaned with any non-ammonia or bleached

based cleaner.

Approved cleaning solutions for ESD surfaces

•

Desco 10446 Reztore Surface & Mat Cleaner

•

3M 8001

Antistatic Mat & Table Top Cleaner

NOTE:

Do not use petroleum-based solvents or alcohol to clean any surfaces on this ESD

Cabinet.

«
...
5
6
7
8
9
»

Содержание ESDC-7836-1000










Отзывы:

Нет отзывов