Kendall Howard 1940-3-100-24, Инструкция по сборке

Страница: 2 / 3

Tools needed:
Wrench: 9/16 & 7/16
Phillips Head
Screwdriver
What’s in the box:
Insert the Left and Right Arm Brackets into
the Center Arm Bracket as shown and
secure with included 7/16 hardware.
Make sure you set them for your desired
depth. Follow this step for each of the arm
assemblies.
* Note - Be sure the Center Arm is
centered so the weight is evenly
distributed.
QTY 4—Vertical 10-32 Tapped Rails
QTY 4—Upper Support Brackets
QTY 4—L Bracket Bases
QTY 32—Tooth Washers
QTY 16—9/16 Hex Nuts
QTY 16—9/16 Hex Bolts
Step 1 : Assemble the L Bracket Bases to the Vertical Rails
as shown below. Do this for all four Rails and L Bracket
Bases. Step 2 : Assemble the Upper Support Brackets to the top of
the Vertical Rails as shown below. Do this for all four Rails
and Upper Support Brackets.
Step 3:
QTY 32—Flat Washers
QTY 16—7/16 Hex Nuts
QTY 16—7/16 Hex Bolts
7/16 Hex Nut
Flat Washer
7/16 Hex Bolt
QTY 4
Left Arm Brackets
QTY 4
Right Arm Brackets
QTY 4
Center Arm Brackets
Right Arm Bracket
Center Arm Bracket
Left Arm Bracket