Kendal Lighting AC-30052 Скачать руководство пользователя страница 8

Страница: 8 / 12

9. ATTACHING THE FAN

BLADES

Figure 13

Figure 14

Blade screws

Blade

Slot

Fan motor

assembly

Fan motor

assembly

Step 1. Remove the nine blade screws from

the fan motor assembly. (Fig. 13)
Step 2. Insert the blades through the slots on

the fan motor assembly. Attach the blade to

the fan motor assembly using three blade

screws. Attach the other blades to the fan

motor assembly. (Fig. 14)

10. ATTACHING THE LED

LIGHT KIT

NOTE:

Before starting installation, disconnect

the power by turning off the circuit breaker or

removing the fuse at fuse box. Turning power

off using the fan switch is not sufficient to

prevent electric shock.

Figure 15

LED light kit

Step 1. While holding the LED light kit under your

fan, firmly snap the wire connection plugs

together.
Step 2. Attach the LED light kit to the switch box

by twisting right tightly.
Note: This is an integrated LED light kit assembly

and should not be disassembled to prevent

electric shock.

Wire connectors

Switch box

Содержание AC-30052













Результаты поиска

Содержание AC-30052

Отзывы:

Бренды по названию

Популярные бренды

Kendal Lighting AC-30052, Руководство по установке

Результаты поиска

Содержание AC-30052

Отзывы:

Бренды по названию

Популярные бренды