Kendal Lighting AC-22656, Инструкция по установке и эксплуатации

Страница: 3 / 9

1. Securely attach the hanger bracket to the outlet box
by washers and screws suppplied. Connect white
wire from ceiling to white wire from receiver with
wire nut. Connect black wire from ceiling to
black wire from receiver with wire nut. (see Fig.5)
2. Carefully lift the fan and seat the down rod ball
assembly on the hanger bracket. Be sure the
groove in the ball is lined up with tab on the
hanger bracket . Do not pinch wires between the
ball and down rod assembly and hanger bracket
(see Fig.6)
3. Install the safety cable into the building structure.
(see Fig.7)
Putting Your Fan Together
Hanging Your Ceiling Fan
1. Remove the hairpin clip & washer from the clevis
pin and remove clevis pin from down rod. (see
Fig.1)
2. Insert the down rod through the center opening in
the canopy,coupling cover and route the motor
leads through the hanger ball/downrod assembly.
Align the clevis pin holes in the downrod with the
holes in the motor coupling. The clevis pin must
pass through the holes in the motor coupling and
the downrod. Place the washer onto the clevis pin
and install the hairpin clip making sure to push
straight leg of the hairpin clip through the hole
near hanger ball to make sure the clevis pin is
properly installed(see Fig.2)
3. Reinstall the 2 set screws in the motor coupling and
securely tighten set screws against the down rod
assembly.
DOWNROD
ASSEMBLY
WASHER
CLEVIS PIN
HAIR PIN CLIP
DOWNROD ASSEMBLY
CANOPY HOLE COVER
COUPLING COVER
WASHER
SCREW
FAN BODY
CLEVIS PIN
HAIR PIN CLIP
MOTOR COUPLING
CANOPY
CENTER BAND
BLADE
BLADE
WASHER
SCREW
CENTER BAND
OUTLET BOX
HANGER BRACKET
FLAT WASHER
STAR WASHER
SPRING WASHER
SCREW
HANGER BACKET
DOWNROD
RECEIVER
WHITE WIRE
BLAC
K
WIRE
WHITE WIRE
RECEIVER
BLAC
K
WIRE
Attached each blade assembly to the center band using
the blade screws and blade washers.Tighten them
securely.(see Fig.3& 4)
Caution: To reduce the risk of personal injury.
Do not bend the blade when installing, balancing
or cleaning the fan. Do not insert foreign objects
between rotating fan blades.