manualshive.com logo in svg

Kendal Lighting AC-22552, Руководство по установке

Поделиться
Скачать
Kendal Lighting AC-22552 Скачать руководство пользователя страница 8

7

10. ATTACHING THE LED 

LIGHT KIT

NOTE:

 Before starting installation, disconnect 

the power by turning off the circuit breaker or 
removing the fuse at fuse box. Turning power 
off using the fan switch is not sufficient to 
prevent electric shock.

Step 1. Remove one of the three light kit 
mounting screws from the mounting ring and 
loosen the other two screws. (Do not remove.)

Step 2. While holding the 18W LED light kit 
under the fan motor assembly, make the 2-pin 
wire connections:
        - White to white          
        - Black to black

Step 3. Place the key holes in the LED light kit  
over the two mounting screws previously 
loosened from the mounting ring. Turn the 
light kit until the light kit locks in place at the 
narrow section of the key holes. Secure by 
tightening the two light kit mounting screws 
previously loosened and the one previously 
removed. (Fig. 15)

9. ATTACHING THE FAN 

BLADES

Step 1. Insert the blade through the slot on the 
motor housing. Align the holes in blade and 
blade bracket, place the blade support plate 
on blade as showing in Figure 14, making sure 
the holes are also aligned and secure with 
fiber washers and screws provided.

Step 2. Repeat this procedure for remaining 
blades.

CAUTION: 

Make sure all screws are 

tightened securely.

Figure 14

Figure 15

Blade

Slots

Blade support
plate

Screws and
fiber washers

Mounting ring

Screws

LED Light kit

Wire connectors

Содержание AC-22552














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды