Kendal Lighting AC-21560, Инструкция по установке и эксплуатации

Страница: 4 / 9

HANGER
BRACKET
SCREW
HANGER
BRACKER
CANOPY
SCREW
CANOPY
SCREW
CANOPY HOLE
COVER
BLADE
SCREW
FLYWHEEL
Caution: To reduce the risk of personal
injury. Do not bend the blade when
installing, balancing or cleaning the fan.
Do not insert foreign objects between
rotating fan blades.
Wiring Your Ceiling Fan
Caution: To avoid possible electrical shock,
be sure electricity is turned off at the main
fuse box before wiring.
1. If you are not sure that the electrical box is
grounded,contact a licensed electrician for
advice.It must be grounded for safe operation.
2. Connect the red wire from receiver to the
red wire from fan with wire nut .Connect
the purple wire from receiver to the purple
wire from fan with wire nut.Connect the
blue wire from receiver to the blue wire
from fan with wire nut. Connect the grey
wire from receiver to the grey wire from
fan with wie nut. Connect the white wire
from receiver to the white wire from fan
with wire nut.Connect the green wire from
ceiling,and green wire from hanger bracket
with green wire from downrod ball with
wire nut.(see Fig.6)
3.Remove one of screws and loosen the other
screw from the hanger bracket. (see Fig.7)
4. Mount the canopy on the hanger bracket
and tighten the screws.(see Fig.8)
5. Place the canopy hole cover over the screws
and twist the cover to tighten. (see Fig.9)
1. Attach each blade assembly to the flywheel
using the blade screws. Tighten them
securely (see Fig.10)
2.Install the flywheel onto motor (see Fig.11)
Installing Blade Assembly