7
10. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove the 1 of 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2
screws previously loosened and the one
screw previously removed. (Fig. 16)
Figure 15
Figure 16
9. ATTACHING THE FAN
BLADES
Figure 13
Figure 14
Screws
Screws
Plastic block
Mounting
plate
Mounting
ring
Screws
CAUTION:
Make sure all screws are
tightened securely.
Step 1. Attach the blade to the blade holder and
blade attachment using the blade screws
provided. Tighten all screws securely. Repeat the
process for the remaing fan blades.
Step 2. Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
Step3. Remove the five plastic blocks from the
fan motor assembly before installing the blade
assemblies to the fan motor assembly. Discard
the plastic blocks, but keep the five screws.
(Figure 14)
Step 4. Attach the blade assembly to the fan
motor assembly by tightening the two screws
previously removed from the fan motor assembly
and the package hardware. (Figure 15)
Fan motor assemby
Fan motor assemby
Blade assembly
Screws
Blade
Blade holder
Blade attachment
