www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
TPD23_F-4937_091118
1.
Remove the lower portion of the housing.
Fasten the upper portion to the pole, using the
square pole adapter plate if necessary. Feed the
appropriate wiring through the center opening.
2.
Slip the bottom portion of the housing onto
the hinged lip.
3.
Make all wiring connections using wet
location wire nuts (by others).
4.
Swing the lower hinged potion of the fixture
upward. Secure the lower to the upper portion of
the housing using the captive screws in the lower
housing. Installation is complete.
Square Pole
(Cut away to
show inside)
Square Pole Adapter
(Not needed for round)
Washer ×2
Lock Washer ×2
3/8" Bolt ×2
For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties
For technical assistance, call 1-800-4KENALL (1-800-453-6255).
WARRANTY
CUSTOMER SERVICE
