When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
www.kenall.com
P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144
2
INSTALLATION INSTRUCTIONS
F-4257_041013
TRUNNION KIT INSTALLATION
1:
Attach housing plate to housing. Align
notch. Use (4) fl at head screws (provided).
2:
Assemble trunninon kits as shown using (4)
¼ -20 × .500" screws and nuts (provided).
3:
Attach trunnion brackets to housing plate
with (4) 10-32 × .375" hex head screws
(provided).
4:
Make electrical connections in conduit body
(supplied by others).
NOTE:
Top of bracket to top of the fi xture
measurements: 9.1" min; 14.6" max
TRUNNION BRACKETS
CONDUIT BODY AND
CONDUIT (BY OTHERS)
HOUSING
PLATE
HOUSING
(To increase depth,
move this fastner here)
MUST USE SEALANT OR
SEALING LOCKNUT
