www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United Stateswith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
N1048-5502_090418
Ceiling Line
Base Plate
Diffuser/Refractor
Wall Line
Anchors and Mounting
Hardware by others
(is required)
1/4-20 × 3/4 Truss
Head Machine Screws
Provided (4 required)
Mounting Hardware
3 Each Side
1/2" DIA.
One on each end
Wireway Cover
4. Connect fixture leads to power supply leads using connectors suitable for the gauge and number of wires being
used (not included). Connections are to be made in the surface adapter. Black fixture lead connects to the
supply conductor, white fixture lead connects to the neutral supply conductor, and the grounding wire must be
connected to a suitable ground.
5. Mount wired fixture baseplate to adapter using the six No. 1/4-20 × 1" screws. Install lamp. Mount diffuser/
refractor to base using Torx
®
fasteners (included) and 9500 screwdriver (ordered 1separately).
NOTE: To insure the fixtures watertight integrity, especially if the fixture is mounted in direct exposure to the
elements, caulk between the mounting surface and base using a high quality caulking material.
