11
Selecting NTSC or PAL video
The default USB Adapter setting is NTSC.
To select PAL video
1. Launch VideoImpression 1.6 (see Figure 10).
2. Click new and then click the capture icon on the next screen.
3. On the video capture screen, click the source icon (see Figures 11 and 12). This will
open a window with several tables (see Figure 13).
4. From the Video Format list, select the appropriate PAL setting.
5. Click OK to close the window and return to the Video Capture screen.
ArcSoft Software
2
Product Overview
Unpacking
Unpack USB Adapter, manual, and the USB Software and Drive Disk. Ensure you have
received all parts shown below.
Connectors
The USB Adapter features an attached USB cable and four connectors: audio, composite
video, S-Video, and video pass-through. See diagram on page 3.
Product Overview
Note:
Ken-A-Vision
®
is not responsible for product damage incurred during
shipment. You must make claims directly with the carrier. Inspect your shipment
carefully for obvious signs of damage. If the shipment appears damaged, retain
the original boxes and packing material for inspection by the carrier. Contact your
carrier immediately.
Figure 1.USB Adapter and accessories
USB Adapter
Part 460-171-318
Audio
Composite
Video
S-Video
Video
Pass-Through
USB Connector
User Manual
Part 800-171-318
USB Software and
Driver Disk Part
910-171-300
USB Adapter
Figure 2. Connectors on USB Adapter
