3
Use the diopter ring on the eye tube to fine focus the visual image for your
eyes. (Point of information - the focal length of the camera which is
producing the images on your LCD or computer screen, is slightly shorter
then the focal distance of your eye in the eye tube. --- to obtain the very
best recorded or projected images, focus using the LCD, computer or
projected image, not the image seen through the eye tube by your eye.)
Recording, Saving and Deleting Images on the microscope:
1. To Record - Push the SAVE button. The word "Recording" will appear on
the LCD screen for 1-2 seconds and go out. You have recorded the
image. Unit immediately goes back to a live image.
2. To View recorded image - push PLAY or PLAY. Image will appear with the
word "bottom", indicating that the image is the 'last or bottom' image in a
stack.
3. To Delete recorded image:
a. Push Save to get back to a live image
b. Push Delete button, Screen will appear with following choices:
• 1. All: Forward
• 2. One: Backward
• 3. Last: Delete
• Exit: Setup
Meanings of these terms:
1. All Forward
In this mode you can erase all the recorded and saved images. To
Erase ALL, Press PLAY button (middle or third button from top),
screen will show the word "Format" blinking in the upper right
corner. Press the PLAY button again, screen will now show
"Formatting" in the upper right corner. This means that all images
were erased, and system will return to 'live' mode. If you press SAVE
button before second pressing of Play images will not be lost.
2. One backward
In this mode you can erase one image at a time. To erase press the
SAVE button to get back to live image, then press DELETE button,
and a new screen appears (with choices 1. Next: Forward; 2.
Prev:Backward; 3. Del:Delete; Exit:Setup.
The word "Delete?" will appear blinking in upper right part of screen.
Press either PLAY OR PLAY on the keypad to select any one image
to be erased. When image you wish to erase appears, press
DELETE button and the selected image will be erased. Again
