Ken A Vision kena T-1050, Инструкция по эксплуатации

Страница: 7 / 16

7
Quick Start Guide
It's as simple as 1, 2, 3 to begin using your new kena
®
digital microscope!
Although this guide will get you up and running, it is recommended you read
the complete manual.
1. Install the Software
Close all windows or other programs before running the installation program.
Insert the included CD labeled AV4 into the computer's CD/DVD drive to
begin the auto installation program.
Click on "Install Applied Vision 4". The installation process progresses through
a series of screens. Click "Next" as each of the different windows appear.
Click "Finish".
The icon has been installed on the desktop
:
NOTE: kena
®
does not require any drivers to operate and will work with other
viewing programs.
NOTE: At any time, to download most current "up-to-date" release of AV4,
visit our website at: www.ken-a-vision.com Click “Support", click "Software
Downloads", select the appropriate link and download to your computer in
minutes.
2. Turn on kena
Turn kena on by inserting the USB plug into the computer USB drive. The com-
puter may indicate it recognizes a new hardware device. kena will remain on
until it is unplugged from the USB port.
3. Launch AV4 Software
Click on the Applied Vision icon. kena automatically turns on and the
software displays on the computer screen.
To turn on the upper light located near the top of the camera head, press the
silver upper LED light button just below the USB cable.
Begin using kena! Place an object to view on the silicone stage pad and turn
the focus knob to bring it in focus.