4
c.
Once finished charging, store the USB cord
and the USB power adapter in the charging
docking area on the back of the
microscope.
8.
Reboot your computer and insert the USB plug of
the digital microscope and insert it into the USB port
of the computer with Applied Vision™ Software
installed.
9.
Place a prepared slide on the stage and move it into
position for viewing.
10.
Start with the 4x objective by raising the stage with
the coarse focus knobs until it will go no higher.
11.
Lower the stage slowly to bring it into focus using
the coarse focus knobs
12.
To sharpen the image, adjust with the fine focus
knobs.
13.
Once the computer is rebooted, launch the Applied
Vision Software.
14.
The image that is being viewed through the
eyepiece of the microscope should be displayed on
the computer screen.
15.
Once the image appears on the computer screen,
simply turn the nosepiece to the next higher
objective lens and do minor adjustments with the
fine focus knobs.
NOTE:
If the image on the screen is flickering, reduce the amount
of light entering through the iris diaphragm and rheostat (light
dimmer).
16.
After obtaining focus of the specimen on the
computer screen, adjust the diopter on the eyepiece
tube for individual eye correction when viewing
through the microscope.
