Kemppi Smart Reader, Руководство по эксплуатации

Страница: 38 / 39

WELDEYE 6.3 Factory reset
9 Glossary
Table 2:
Term Description
Adapter WeldEye adapter device that measures
current and voltage of a welding machine,
and enables the use of Smart Reader with
any welding machine.
Configuration file Smart Reader WiFi configuration file. Used
during the setup to configure Smart Reader
to connect to a wireless network. The
configuration file is created with WeldEye
cloud service. Contains the WiFi access point
name and password in encrypted format.
Deviation Alert or warning of non-conformance in
welding data. For example, if the welding
was done outside WPS limits, or if welder
does not have qualifications, a deviation
alert is raised.
Filler batch number Batch number of the filler material can be
recorded in WeldEye for detailed welding
documentation.
Identifier A unique number or string, usually in
barcode format, that identifies the welder,
WPS, weld, or other metadata. Can be
scanned with the Smart Reader's barcode
scanner or entered manually.
Pass A single welding pass, such as the root layer.
May consist of multiple runs.
Pass complete Function that allows the welder to report
the completion of a single welding pass as
completed and enter the length of the weld.
WeldEye can calculate the heat input based
on this data. The function enables pass level
documentation and heat input tracking.
OPERATING MANUAL | EN 38
©
KEMPPI | 2017-12-22