Kemper KHS MASTER 2.1 I SLAVE, Инструкция по установке и эксплуатации

Страница: 74 / 128

74 / 128 – K410068602009-00 / 08.2021 – © www.kemper-olpe.de
Input box
If a KHS Mini Control System is selected in
the selection interface, the relevant input
box appears on the right-hand side.
Click the ADD LINE button to add up to 16
lines to the TIMER. Press the button to
delete the line in question from the TIMER.
Click the RESORT TIMER button to delete all
deactivated lines and to push empty lines to
the back. The remaining input options in the
lines are explained below.
Note!
To simplify configuration and to guarantee correct installation, fill in the sys -
tem commissioning overview of the KHS Mini Control System (see
https://www.kemper-uk.com/building-technology/service/downloads/) before
making the settings.
It is mandatory to fill in the form to be able to take advantage of the
optional factory support.
Note!
The selected times and temperatures serve as examples.
The values must always be set for each building and for each type of use and
medium so that representative measurement values are generated and
intended use is maintained for the system.