Kemper EVOLUTION LINE, Руководство по эксплуатации

Страница: 129 / 204

Operation
Emil Kemper GmbH EVOLUTION LINE roll machine
121
7.4.9 Setting the flour duster with flour break-up shaft
Configuration of the line module flour duster with flour break-up shaft in the line is
displayed in section "5 Overview of the line".
Note!
The schematic diagrams below describe the flour duster with break-up
shaft. The version that is delivered may differ from the version shown here.
7.4.9.1 Filling the flour duster with flour break-up shaft
Pull the adjusting handle (2) in the direction of
the arrow (3) to extract the flour duster (1) from
the holder.
Fill the container with flour.
Push the flour duster (1) back into the holder in
the direction of the arrow (2).
Turn the adjusting handle until the drive
engages.