Kemper EVOLUTION LINE, Руководство по эксплуатации

Страница: 120 / 204

Operation
112
EVOLUTION LINE roll machine Emil Kemper GmbH
7.4.6 Setting the cutting station
Configuration of the line module Cutting station in the line is displayed in section
"5 Overview of the line".
7.4.6.1 Setting the cutting depth
The cutting depth can be set via an adjusting wheel directly above the triangular knife.
The setting can be read on a scale.
Turn the adjusting wheel (1) in the direction of
the arrow (2) to increase the cutting depth.
Turn the adjusting wheel (1) in the direction of
the arrow (3) to reduce the cutting depth.
7.4.6.2 Setting the hold-down
The hold-down is set via adjusting wheels on both sides of the cutting station. The setting
can be read on a scale at the adjusting wheels.
Turn the adjusting wheels (1) in the direction of
the arrow (2) to move the hold-down up.
Turn the adjusting wheels (1) in the direction of
the arrow (3) to move the hold-down down.