- 15 -
7.3.11. Cycle flushing:
If only one temperature control is set for one device, the control automatically sets a changeable time
control (cycle flushing)! This is used for regular flushing, 1 x per week, to prevent stagnation taking place for over a week.
The time of the cycle flushing duration can be set individually (dependent on the water volume in the piping system). Adapt
the flushing time for the routine flushing according to the capacity volume!
At this point, apply the default of the operation modes in "Write configuration to the
control" in the MASTER control.
7.3.12. After entering the operation modes, write the configuration into the control
