25
Schutzgitter durch anziehen der Befestigungsmutter mit der Hand, befestigen (Abb. 1).
Befestigungsmutter nicht überziehen. (Abb. 1 Befestigungslachen und Befestigungsmutter)
Die Nut in der Mitte des Rotorblattes wird an der T-förmigen Nabe auf der Motorspindel
ausgerichtet um korrekte Positionierung zu gewährleisten.
Rotorblatt durch anziehen der Verkleidung (durch drehen gegen den Uhrzeigersinn) befestigen
(Abb. 2) Die Verkleidung ist selbstspannend; nicht überdrehen. (Abb. 2 Verkleidung durch
drehen gegen den Uhrzeigersinn befestigen)
Heben Sie alle Befestigungslachen an der Vorderseite des Schutzgitters auf (Abb. 3).
Befestigungs
-mutter
Verkleidung durch
drehen gegen den
Uhrzeigersinn befestigen