9
Installation Instructions Kemlan Natural Draft Electronic Ignition Gas Fireplaces
Laying the fire - 850 Ceramic Log
1 . L O C AT E 4 C E R A M I C C OA L S :
Four ceramic
coals are supplied with the burner base. These coals must be laid in
the position indicated on the drawing with the taller coals on the
ends and smaller coals in-between.
2 . L O C AT E L O G N O. 1 :
This is the largest log that is
positioned at the rear of the grate. Two locating pins are positioned
at the rear of the burner. The large log has two holes on the
underside to position in place.
3 . LOCATE LOG NO’S 2 & 3:
Two front log NO’S. 2 &
3 are supplied to fit into the space between the metal frame and
the ceramic base. These logs do not cover the front burner ports
but are designed to deflect the front flame back into the fire.
L O G S
P O S I T I O N I N G O F
A L L L O G S
• It is important to follow the log recommended
positioning.
• Log NO. 6, 10, 9 and 4 must be pinned to rear log
with pins provided.
• Not doing so can adversely effect the operation of
the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance.
