RECONNECTION
BLUETOOTH OPERATION
1) Power on the speaker and your last paired device Bluetooth.
2) Ensure you are within range of the speaker, the unit will now automatically reconnect.
3) If the device is out of range from the speaker, it will disconnect automatically.
4) If your device was previously paired with the speaker, but it wasn’t the last paired device:
a. Ensure no other devices are currently paired.
b. Enter the Bluetooth Menu on your device being paired.
c. “KEMIMOTO” will display under available devices.
d. Choose the “KEMIMOTO” to reconnect.
NOTE:
Some devices may require a manual Bluetooth reconnection once the devices Bluetooth is powered OFF / ON and/or
back in range.
CAUTION
Don‘t connect the speaker to a 24v power supply, the product is only suitable for 12v.
Don‘t clean in hot sun or on very hot days.
Don‘t use abrasive or highly alkaline cleaners on the main body.
Don‘t scrape the main body with razor blades, or other sharp instruments.
Don‘t ever use, gasoline, acetone or carbon tetra chloride.
Don‘t ever use a pressure washer aimed at the speakers.
SPECIFICATIONS
Technical Specications:
Bluetooth
：
Version: 4.1
Waterproof : IP-65
Roll Cage Support Size: Up to 1.65''-2 ''(5cm)
Tweeter Type: 1” Titanium Dome
Frequency Response: 100hz-20kHz
Impedance: 4 Ohms
Magnet: 10 Oz
Sensitivity: 90 dB
Construction Material: Engineered ABS
Speaker Housing Dimensions (L x W x H): 5.4'' x 5.4'' x 7.0'' inches
Maximum Output Power: 300 Watts
3 of 3
B0117-00101BK
