KEM MKC-710, Руководство по эксплуатации

Страница: 91 / 133

6. Setup
MKC-710 81
Beep 6-7.
Select the beep at the end of measurement.
Select “ 7
．
Beep” with [
↑
][
↓
] and press [ENTER].
[Beep]
Select the beep.
x
Off : Turns off the beep. Turns off the beep during measurement as well.
x
Set : Sets up the beep. Select from types below
[Type]
Select the beep from the five (5) types below.
Move the cursor with [
←
] [
→
] keys to the type you wish to use, and press [ENTER].
x
Type1
：
Beep sound lasts for about two seconds: “pi, pea -pea-pea- pea”
x
Type 2
：
Beep sound lasts for about four seconds: “pi -pi-pi-pi-pi- pi”
x
Type 3
：
Beep sound lasts for about ten seconds: “pi, pea -pea-pea- pea”
x
Type 4
：
Beep sound lasts for about one second: “pi -pi-pi-pi-pi- pi”
x
Type 5
：
Beep sound lasts for about one second: “pi, pea -pea- pea”