Note: Optimum performance can be achieved within these operating temperatures.
Unit parts identification Air conditioning features
1 Front panel
2 Air filter
3 Frame
4 Cabinet
5 Air inlet grille (outdoor side)
6 Air outlet grille
7 Operation knob
1
2
3
4
5
6
7
8
8 Power supply cord and plug
The operation panel of your unit will look like the following:
Accessories
drain pan (optional) screw (for fastening
the front panel)
1 2
NOTE: The outline of the operation panel is based on typical model, the function is the same with your air
conditioner while some difference may exist in appearance.
Selector
The controls featured in this manual are representative of many available models. Your model may offer slightly
different features.
Cool Mode
The desired cool setting is selected by rotating the knob to the right to the appropriate location.
"HIGH COOL" – has maximum cooling effect and airflow. "LOW COOL" – has minimum cooling effect and airflow.
"OFF" – will completely shut off the unit.
Electrical work
Under normal circumstances there is no reason to modify the electrical connection. In case it is required, a qualified
service technician should perform this task.
1 Power cord conductors are distinguished according to colour as follows (see Fig.1)
2 For your safety and protection, this unit is earthed through the power cord (see Fig.2)
Please contact the Kelvinator Customer Care department or a qualified service agent or a similar qualified
person if you want to replace it.
3 Be sure that the unit is correctly grounded. The wall outlet (ensure that the circuit breaker for the power outlet
used for this product has suitable current rating) should be provided with reliable earth wire.
"HIGH/LOW FAN" – Permits HIGH/LOW fan speed operation without cooling (heating).
Note: When selecting a fan speed, the compressor will not run.
Fig. 1
A
power cord
E
Fig. 2
air break switch
N
E- earthwire, yellow/green N- neutral wire, blue
A - active wire, brown
wall outlet