Kelvinator KSV26CRE, Руководство пользователя, Страница: 17 / 24

Kelvinator Air Conditioning Cleaning the air filters 17
General maintenance
If the air conditioner is not going to be used for a long period
of time:
• Operate in fAN only mode for 3~4 hours to allow the
unit to completely dry out.
• Switch off the unit and pull out the power plug.
• Remove the batteries from the remote control.
• The outdoor unit requires periodic maintenance and
cleaning. Do not attempt to do this yourself. Contact
your dealer or service technician.
Checks before operation
• Check that the wiring is not broken or disconnected
• Check that the dust filter is installed.
• Check if the air outlet or inlet is blocked if the air
conditioner has not been used for a long time.
warning
Do not touch the metal parts of the unit when removing the
filter. Injuries can occur when handling sharp metal edges.
Do not use water to clean inside the air conditioner.
Exposure to water can destroy the insulation, leading to
possible electric shock.
When cleaning the unit, first make sure that the power and
circuit breaker are turned off.
4 The healthy air freshening filters (if applicable) like Active
carbon filter / BIO filter / Vitamin C filter / Silver ion filter
are fixed on the dust filter.
Remove the healthy air filters from the support frame of
the dust filter.
Clean the healthy air filters at least every three (3) months
and replace every 6 months.
Clean with vacuum cleaner if possible.
5 Install the healthy air filters back in position.
6 Install the upper portion of the dust filters back into the
unit, taking care that the left and right edges line up
correctly and place dust filters into position.
dust filter
plasma filter